And the major loop problems can be easily with some de-soldering, cleaning
of the leads and pads, and re-soldering.
It seems that the components aged on the shelf and thus the leads oxidized
and/or the bare copper boards were inadequately cleaned before soldering.
This leads to problems in future years.
Cleaning and re-soldering fixes it permanently.
----- Original Message -----
From: "Jim Weisz" <firstname.lastname@example.org>
To: "Discussion of Ten-Tec Equipment" <email@example.com>
Sent: Wednesday, February 15, 2006 8:17 AM
Subject: Re: [TenTec] Paragon mic
> Following along with this thread, I would like to add that my experience
> with the
> TT705 mic has also been excellent.. The combination of the 705mic and my
> Paragon, have
> always resulted in reports of "excellent" audio.., and most often as
> Vic,WA4THR had
> stated, these reports were unsolicited...
> Enjoy your Paragon, its an awesome radio.. just be aware of the typical
> PLL problems
> on the major loop board...
> 73, Jim K2NP
>> ----- Original Message -----
>> From: "Vic Klein" <firstname.lastname@example.org>
>> To: email@example.com
>> Subject: Re: [TenTec] Paragon mic
>> Date: Tue, 14 Feb 2006 11:05:11 -0500
>> I have a Shure 444 that I used on my old Triton, but an Argonne AR-57
>> dual-element crystal mic always got better reports. On my Paragon I use a
>> TT-705 and get unsolicited compliments on the transmit audio.
>> > Hi,
>> > I have a pargon I on the way and would like to know
>> > what mic has recieved good results with it. I own a
>> > heil goldline with a swithchable hm-4 cartridge.
>> > also a heil hm-5 element mic and and a ten-tec hand
>> > mic that came with my 526. before buying an adapter
>> > cable to go with my heils or buying a stock tentec
>> > 706 i would like to know what other people have
>> > found to work well with their paragons.
>> > TNX,
>> > Larry N1YW
>> TenTec mailing list
> Search for businesses by name, location, or phone number. -Lycos Yellow
> TenTec mailing list
TenTec mailing list