The O2 schematic hasn't been published yet as far as I know.
Chief Technical Officer
Results Radio, LLC
----- Original Message -----
From: "Sinisa Hristov" <email@example.com>
To: "Discussion of Ten-Tec Equipment" <firstname.lastname@example.org>
Sent: Wednesday, February 15, 2006 6:16 PM
Subject: Re: [TenTec] Orion II manual / firmware for 565 / 8P with Orion II
> Ron Castro wrote:
>> It does not appear to be. I have a 6 Hz difference in the main and sub
>> receivers on all bands.
> Grant Youngman wrote:
>> It doesn't appear to be. There is still a very noticable frequency/phase
>> difference between the two receivers when locked to a single VFO.
> Thank you for information, gentlemen.
> The frequency difference may be caused by firmware, even with all clocks
> locked to TCXO.
> The only reliable way is to look at the actual codec clock source.
> In Orion I it was a 14.360 MHz crystal connected to the main codec
> (page 6 of Orion I logic board schematic).
> Has anybody dared to look at Orion II logic board, or at least the
> Sinisa YT1NT, VE3EA
> TenTec mailing list
TenTec mailing list