TenTec
[Top] [All Lists]

Re: [TenTec] Orion II and Audio Peak Filter

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Orion II and Audio Peak Filter
From: John Nason <jmnason@yahoo.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 18 Feb 2006 08:44:18 -0800 (PST)
List-post: <mailto:tentec@contesting.com>
I too tried my old Autek QF-1A on the Orion II.  It
was mandatory on my old Kenwood.  However it did not
seem to really help with the Orion.  I do feel some
audio filtering would help but I am hesistant to buy
an aftermarket product without solid recommendations. 

73,
John NA9U

--- RaySoifer@cs.com wrote:

> In a message dated 2/17/06 11:12:21 PM GMT Standard
> Time, 
> robert.chortek@berliner.com writes: 
> > Has anyone out there in Ten Tec Land added an
> audio peak filter to their
> > Orion.  That is one of the features that is really
> useful on the
> > FT1000D.  Can one be easily added to the Orion in
> some fashion?
> > 
> I've tried my old Autek QF-1 audio filter, which can
> narrow down to 30 Hz, 
> but frankly I find the O2's DSP noise reduction to
> be far more useful in pulling 
> weak signals out of the noise.  A clear case of new
> technology beating the 
> old.  The receiver in my FT-102, which is comparable
> to the FT-1000D (the same 
> designer did both, etc.) is very good, especially
> with the 250 Hz roofing and 
> 2nd IF filters in place of the stock Yaesu 500 Hz
> ones, but the O2 is 
> significantly better.
> 
> 73,
> 
> Ray W2RS
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>