I would like to use the Auxiliary I/O plug and cable sent with the Orion II
without modification if possible. The I/O socket is 8-pin and the plug is
5-pin. Pin 5 of the socket is a "no connection (NC)," but pin 5 of the plug
have a wire connected to it (Red). FSK is available on pin 7 of the socket,
but there is no pin 7 of the plug (does this strike anybody else as strange?).
Can I simply put a jumper from pin 5 of the socket to pin 7 of the socket
(or alternatively rewire pin 7 to pin 5) so I have FSK on pin 5 of the supplied
plug and cable?
Thanks, Ken K5KC
TenTec mailing list