[Top] [All Lists]

Re: [TenTec] Help

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>,kenj@eastex.net
Subject: Re: [TenTec] Help
From: John/K4WJ <k4wj@bellsouth.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 22 Feb 2006 08:59:07 -0500
List-post: <mailto:tentec@contesting.com>

How much current is being drawn when the power supply kicks off? It 
should kick off when you exceed 20 amps. If this is what is happening 
then maybe the impedance of the antenna is too low. If your swr is 
over 2:1 and the impedance is less than 25 ohms you may see too much 
current being drawn by the PS and it will kick off.

At 09:00 PM 2/20/2006, you wrote:
>I am a new owner of a Omni D and when turn up the drive, it kicks the P/S
>off, all help would be appricated
>Ken N4ALP P/s the Ps is a 252 m
>TenTec mailing list

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>