TenTec
[Top] [All Lists]

[TenTec] [Fwd: Re: [Elecraft] K2 microphone advice]

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] [Fwd: Re: [Elecraft] K2 microphone advice]
From: ron <roncasa@verizon.net>
Reply-to: roncasa@verizon.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 02 Mar 2006 14:07:37 -0500
List-post: <mailto:tentec@contesting.com>
I thought this is really cool, that someone would make this 
recommendation on elecraft reflector.
(and you guys complain about TT mikes, Ha!) smile

Ron wb1hga

  message follows:

Hi

I use a TenTec 701 hand mike. It is a little smaller than the MH2 
and comes
with a 4 pin connector so you will need to go to Radio Shack and get 
an 8
pin connector and install it in place of the 4 pin. The interface is 
the
same as the MH2 with the 5.6k resistor for bias required. Works good 
and is
inexpensive ($28)

Don Brown
KD5NDB


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] [Fwd: Re: [Elecraft] K2 microphone advice], ron <=