Thank you Don.
My main email is firstname.lastname@example.org
or I also check email@example.com
161 Fraser G4BJM
>From: "Donald Watters" <firstname.lastname@example.org>
>Reply-To: Discussion of Ten-Tec Equipment <email@example.com>
>To: "Discussion of Ten-Tec Equipment" <firstname.lastname@example.org>
>Subject: Re: [TenTec] OMNI6+ SSB transmit quality - HELP!
>Date: Wed, 5 Jul 2006 12:03:48 -0300
>What is your current email address? Have some info for you
>161 - Don, VE1BN email@example.com
>----- Original Message -----
>From: "Fraser Robertson" <firstname.lastname@example.org>
>Sent: Tuesday, July 04, 2006 5:56 PM
>Subject: [TenTec] OMNI6+ SSB transmit quality - HELP!
> > Hi all, is possible to transmit good quality SSB from this rig? I get
> > reports of muffled audio. Listening on another RX I know what they
> > I've re-aligned the driver & pa bias, carrier oscillators etc. I've
> > isolated the mic ground as by design it shares the PTT ground and
> > noise was getting into the mic amp.
> > With a two tone test the signal looks ok on a scope and spectrum
> > (products 26dB and 38dB down).
> > I've tried different power supplies, different mics and audio sources.
> > It sounds reasonable on receive, to me anyway, and works well on CW.
> > The rig has the stock filters fitted. A friend has the Inrad SSB filter
> > and
> > says he gets muffled audio reports too.
> > I've ruled out RF feedback and am running out of ideas. Any advice
> > be
> > appreciated. The audio is readable but not crisp clear quality. (The
> > is an upgraded Omni6).
> > Thanks / 73 Fraser G4BJM
> > _________________________________________________________________
> > Windows LiveT Messenger has arrived. Click here to download it for free!
> > http://imagine-msn.com/messenger/launch80/?locale=en-gb
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>TenTec mailing list
Be the first to hear what's new at MSN - sign up to our free newsletters!
TenTec mailing list