TenTec
[Top] [All Lists]

Re: [TenTec] Low output on Centruion after lightning

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Low output on Centruion after lightning
From: Ken Brown <ken.d.brown@hawaiiantel.net>
Reply-to: ken.d.brown@hawaiiantel.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 10 Jul 2006 15:45:54 -1000
List-post: <mailto:tentec@contesting.com>
Hi Jim,

The fact that the amplifier still works at all suggests that the amplifier did not get zapped bad enough to kill a tube. I would first suspect something more sensitive such as a semiconductor in the bias control circuitry has been damaged. Yes maybe a tube has been damaged, however before putting in new ones I would be sure that the bias control circuitry is functioning properly. You don't want to ruin a brand new tube, and without the right bias you could do just that. How do the grid and plate currents at zero drive power and full drive power compare to what they were when the amplifier worked correctly? What about the exciter? Is it still putting out full power? How about interconnecting coax cables? Are you sure one of them has not partially failed? Or even your power indicating device (external RF watt meter or built-in power indicating function on the amplifier multimeter?) Maybe the amp is still putting out full power and your watt meter is not reading correctly after the lightning strike. More details should be ascertained before dollars expended on new tubes.

DE N6KB

Jim Miller WB5OXQ wrote:
I have a Centurion about 6 years old that has always made around 1200-1300 
watts on all hf bands except about 1000 on 10 meters.  I recently had a 
lightning strike to my fiberglass dual band vhf uhf antenna on a different 
tower from my hf antennas and neither of my hf transceivers were damaged.  I 
now find that I can only get about 700 watts on any band driving the amp with 
either transceiver.  Could this have damaged the tubes?  I don't mind a new 
pair of 3-500's if that will fix the problem.  Should I buy the regular 3-500z 
tubes or the zg graphite models.  Will I gain anything by using the graphite 
plate tubes?  Any mods anyone can recommend that will improve the amp 
performance while I am in there?  Suggestions please!

Jim & Ella Miller WB5OXQ & KA5EPM
     Abby & Sparky
Dalmatian Furbabies
        Waco, TX
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



<Prev in Thread] Current Thread [Next in Thread>