TheSG-500, PW-1 and Quadra were reviewed in QST. The SGC has a 3rd Order
IMD of -28 dB and 5th Order of -48. The PW-1 is -36 and -41 respectively.
The Quadra as -32 and -44. None are anything to write home about. Also,
the SGC had spurious and harmonic (worst case) of -49 dB vs. -60 for the
PW-1, -50 for the Quadra.
1 kW MOSFET amps should be able drop below $3K since prices are dropping for
the components. Typically, broadcast amps are made from pre-built 'pallets'
of 300 or 600 Watts from 3rd party suppliers. Even Harris doesn't make its
own amp modules, but outsources the work. A "no frills" amp without the
auto tuner, which is only needed if your loads are not near 1:1, even with a
nice switching power supply that competes in price with a tube type rig
should be only a few years away.
Ron Castro
Chief Technical Officer
Results Radio, LLC
----- Original Message -----
From: "Rob Atkinson, K5UJ" <k5uj@hotmail.com>
To: <tentec@contesting.com>
Sent: Sunday, July 16, 2006 4:27 PM
Subject: [TenTec] Solid State Amps
I'm not sure how many hams want a no-tune amp--tuning a tube plate to low
Z
doesn't really bother me that much, in fact I prefer to do it myself, not
trusting some logic circuit to tune and load for me. however I know one
of
the great things about the PW-1 is that it follows the icom exciters
making
them 1 kw transceivers which I must admit is pretty nice. Also, it's
easier to remote the amp when it's no-tune. But I think a lot of hams
make
buying decisions based primarily on the purchase cost. Since they aren't
transmitting around the clock every day of the year, operating costs
aren't
that much of a consideration. If I transmitted all the time, a 90%
efficient s.s. tx would be attractive to me. So, in other words, I
understand the broadcast industry moving to s.s. but their reasons mostly
do
not apply to hams, at least for now. If a s.s. 1.5 kw ham amp or even a
1
kw ham amp can hit the $3K mark, then things will change.
re the SGC, I did not know about the IMD problem. Ron, do you know how
the
PW-1 does in that department? it has a reputation for being a pretty
robust
s.s. amp--i heard the 1 kw pep spec is conservative.
73
rob / k5uj
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|