TenTec
[Top] [All Lists]

Re: [TenTec] O2 Sidetone...RST 599C

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] O2 Sidetone...RST 599C
From: "John B. Egger" <john_egger@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 01 Oct 2006 22:13:48 +0000
List-post: <mailto:tentec@contesting.com>
Thanks for the suggestions! This reflector is a wonderful resource.

I don't think voltage drop is the problem. I can't get my voltmeter 
probes onto the contacts, but here's a report of a couple of 
experiments. First, when I observed the chirpy sidetone a few days ago, 
I ran the power down to "1" and up to "100" with no change in sidetone 
quality. Second, I have a variable voltage supply (Astron VS-35M); 
today, when I have a crystal clear sidetone, I ran the voltage down from 
where it had been (13.4v, approx.) to 12, then to 11... the meter LEDs 
began to blink when keyed at power 80 and 11 volts but still no 
deterioration of sidetone note. (I probably shouldn't have done that, 
and didn't stay at 11 long; we're back at 13.8 now.) Keying at PWR 80, 
the Astron's ammeter was jumping but there were no fluctuations in its 
voltmeter---though that could be the result of the power supply's design.

Maybe I just need more experience with the radio. I'm not going to worry 
about this, especially since the sidetone note is often just fine. I'll 
just enjoy this beautiful radio for a while and see what transpires.

--John K3GHH
Registered Linux User #291592

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>