On my 585 Paragon with the RS-232 board the Rxdata and Txdata lines are
crossed from one end of the cable to the other. Mine was wired just like the
manual and works fine, but I think a standard null-modem adaptor with a
straight cable would work the same.
=Vic=
WA4THR
-------------------------------------------
To: tentec@contesting.com
Subject: [TenTec] Omni VI computer interface question
From: john.brewer@us.schneider-electric.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 9 Nov 2006 15:35:57 -0500
List-post: <mailto:tentec@contesting.com>
The info in the manual on how to interconnect the Omni VI is not clear to
me. Do I need to switch Rxdata and Txdata on the cable used from the Omni
to the computer, or do I use a straight serial cable (Rxdata to Rxdata,
Txdata to Txdata)?
Trying to run Logger32 with the Omni and Paragon (it's already working with
my K2)
Thanks!
John K5MO
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|