TenTec
[Top] [All Lists]

Re: [TenTec] Orion mic to orion II mic

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Orion mic to orion II mic
From: "Duane Calvin" <ac5aa1@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 12 Dec 2006 22:25:54 -0600
List-post: <mailto:tentec@contesting.com>
Just make sure the grounds and shields are properly handled.  The Orion's
4-pin mic connection is a little picky about how it wants to work correctly
regarding the mic shield and the PTT return.

        73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Lee Armitage
Sent: Tuesday, December 12, 2006 10:11 PM
To: Discussion of Ten-Tec Equipment; John
Subject: Re: [TenTec] Orion mic to orion II mic

John,

I sent an email to Lyman at hatchermikescb@yahoo.com and he will make up 4 
pin to 8 pin or 8 pin to 4 pin or anything you want to adapt any mic to any 
rig for $18.99 plus $4.99 shipping.

I note he has 99.6% Positive Feedback for 1930 transactions on eBay so he 
must make a good product.

Thanks again for the lead on this.

Happy Holidays,

Lee N0LYW

----- Original Message ----- 
From: "John" <brazos@rochester.rr.com>
To: "Lee Armitage" <LEE@GJ.NET>; "Discussion of Ten-Tec Equipment" 
<tentec@contesting.com>
Sent: Tuesday, December 12, 2006 6:26 PM
Subject: Re: [TenTec] Orion mic to orion II mic


> Hi Lee, well I saw the adapters for sale on ebay under tentec stuff I am 
> getting a oII and I have a mic from my jupiter so I thought I would use 
> the adapter until I could afford the mic I want .   John
> ----- Original Message ----- 
> From: "Lee Armitage" <LEE@GJ.NET>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Tuesday, December 12, 2006 8:04 PM
> Subject: Re: [TenTec] Orion mic to orion II mic
>
>
>> John,
>>
>> I emailed Ten Tec Service Department and just received their reply today 
>> on
>> doing the opposite of what you want to do.
>>
>> I just purchased a Orion I and the seller included a new 108A mic which 
>> is
>> the 8 pin for the Orion II.
>>
>> I asked if they had an adapter, 8 pin to 4 pin,  and the Service 
>> Department
>> suggested cut off the 8 pin and  install a new 4 pin plug so it will work

>> on
>> the Orion I.
>>
>> You would think someone sells a 4 pin to 8 pin and a 8 pin to 4 pin 
>> adapter?
>>
>> In the meantime, I purchased a used 106 mic (4 pin) for the Orioin I 
>> just
>> received today.
>>
>> Lee N0LYW
>>
>>
>>
>>
>> ----- Original Message ----- 
>> From: "John" <brazos@rochester.rr.com>
>> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
>> Sent: Tuesday, December 12, 2006 1:11 PM
>> Subject: [TenTec] Orion mic to orion II mic
>>
>>
>>> Has anyone seen the adapter to allow you to use the older four pin plug
>>> with the orion II 8 pin plug ?  do these work ?  thanks John
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>