Ron
You have to get adapter cables (Radio Shack) to go from the TT cable
to your computer. the TT cable is color coded as to what goes where.
The Argo V manual covers the connectiolns thoroughly. good luck,
and Happy New Year
Ron
K3MIY
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Ron Notarius W3WN
Sent: Thursday, January 04, 2007 6:14 PM
To: Ten-Tec Reflector
Subject: Re: [TenTec] Argonaut V on Digital Modes
The good news is that the 5 pin DIN-to-Phono adapater came today.
The not so good news... all I got was the cable, no indication as to which
Phono goes to what. Yes, I know, it's probably in the manual; alas, when
the rig was loaned to me, the manual didn't come with it (and is probably no
longer available, which is another story).
Anyone out there with the info? I don't mind experimenting, and if I blow
up something in the laptop, that's one thing (the laptop's half dead
already), but since the rig isn't mine, I don't want to accidently damage
anything!
73, ron w3wn
-----Original Message-----
From: Ron Notarius W3WN [mailto:wn3vaw@verizon.net]
Sent: Friday, December 29, 2006 3:36 PM
To: Ten-Tec Reflector
Subject: Argonaut V on Digital Modes
Well, I finally got off my kiester and ordered the 5 pin DIN-to-Phono
adapater for the Argonaut V I've been temporary custodian of, so that I can
interface it with my laptop for PSK and other digital modes. Had to add a
coffee mug to the order in order to make minimum, but so it goes...
Any suggestions on a "starter" software package to use on the laptop? (It's
still running Windows 98SE and probably will until it dies due to memory and
hard drive contraints)
73, ron w3wn
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|