Make sure TXloop is not turned on if TXOUT and TXEN are not connected
together.
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: <K9RT@aol.com>
To: <tentec@contesting.com>
Sent: Thursday, February 15, 2007 9:12 AM
Subject: [TenTec] Orion problem
> Well it has finally happened. First problem in an otherwise flawless
> operational Orion classic..
> My Orion receives fine, keys fine BUT no rf reaches the SO239 on the back
> panel and the keying line also won't key the amp. Panel meter says it is
> transmitting etc.
> Have triple checked everything I can think of. Last time it worked
> flawlessly the day before with no hint of a problem.
> Have turned it off an on several times with no improvement noted.
> Only thing I haven't done yet is a full reset.
> Any suggestions before I do that would be most welcomed. Hate to do a
reset
> due to having to reset all parameters but will do so gladly if that is the
> next sep.
> Thanks
> Dick K9RT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|