TenTec
[Top] [All Lists]

[TenTec] 2.060b

To: tentec@contesting.com, orion@contesting.com
Subject: [TenTec] 2.060b
From: PA3ARM <ti039627@tiscali.nl>
Reply-to: PA3ARM <ti039627@tiscali.nl>,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 25 Apr 2007 15:17:44 +0200 (CEST)
List-post: <mailto:tentec@contesting.com>
Bob Henderson 5B4AGB wrote :

>>>
Impementation of band-stacking ID is a big plus.  Many thanks Ten Tec

The benefit of adding the SPLIT designator is completely lost on me. 
Split 
already being indicated by both VFO A/B switch lights and also TRS 
designators above and below main frequency LSDigits.

QSK speed improvement is much appreciated but the previously 
acceptable CW 
sidetone is now AWFUL.  High harmonic content with a loud tail-end 
click.  I 
do hope Ten Tec implement a fix for this quickly !

If the sidetone wasn't screwed this would be a very worthwhile release 
from 
my POV.

Bob, 5B4AGN

<<<<<<

I agree wid Bob; nice release though (the 566 sidetone seems to be oke 
by the way)
I get hope mi 4 items:
1. XIT to follow RIT <>
2. 50 Hz tuning steps
3. Remote Pod Enc settings in Other menu to F buttons on Pod
4. Show either offset or 2 frequencies when in split on same band 
(menu option)
will be implemented sooner or later.

Hope they will look at the side tone

Harry
PA3ARM
PA3ARM@arrl.net




_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] 2.060b, PA3ARM <=