[Top] [All Lists]

Re: [TenTec] Frozen display on Omni V.9

To: "TenTec List" <TenTec@contesting.com>
Subject: Re: [TenTec] Frozen display on Omni V.9
From: "Rick Williams" <rick.williams@telus.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 2 Aug 2007 09:00:53 -0700
List-post: <mailto:tentec@contesting.com>
Why not order 2 encoders and build yourself a 301 remote pod? You put it in
a small project box and add a multi conductor cable and wire it into the
dB-25 on the back of the Omni V.9.   The 301 is a VERY useful item and if
this happens again you can use it to tune while the parts are in the mail.



Website:  http://www3.telus.net/ve7tk  

Subject:        Re: [TenTec] Frozen display on Omni V.9
From:   Bob Towers <mm0rkt@beeb.net>
Date:   Thu, 02 Aug 2007 08:31:22 +0100

Mike Brown wrote:
> Is there any Ten Tec service department in Europe?
> If not call Ten Tec here in the states. They should give you a place to 
> start looking anyway.
> 73, Mike
Yes, there's one here in the UK, called AOR UK, would you believe?

The service guys in TenTec USA reckon it's most likely a faulty optical 
encoder, so I'll order one up and do it myself.



TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>