[Top] [All Lists]

Re: [TenTec] AL-811 amp integration with Omni V

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] AL-811 amp integration with Omni V
From: Bob Towers <mm0rkt@beeb.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 05 Aug 2007 11:15:24 +0100
List-post: <mailto:tentec@contesting.com>
k8vf_mark@centurytel.net wrote:
> I had one where the guy blocked the relay.
> Like I said, I have had several rigs....on one the guy cut the lead on the 
> transistor, I was able to drizzle solder from leg to board.
> Perhaps the relay is blocked in some way.
> Just a thought.
> Mark 
> I don't use a linear with my Omni V: 100W is fine for me for datamodes 
and CW. I got fed up with the relay making all that noise so I put a 
sliver of cardboard between the magnet and the armature. Sure makes it 
inaudible now....



TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>