[Top] [All Lists]

Re: [TenTec] AL-811 amp integration with Omni V

To: <tentec@contesting.com>
Subject: Re: [TenTec] AL-811 amp integration with Omni V
From: "Rick Williams" <rick.williams@telus.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 6 Aug 2007 20:43:47 -0700
List-post: <mailto:tentec@contesting.com>
I couldn't agree more Mark documentation on any mods is VERY important.

As has been mentioned on this reflector, I was a former owner of this
particular rig (2nd owner) and I did silence the relay.  I lifted a resistor
feeding the relay coil.  Prior to selling the rig I soldered the resistor
back in place returning the relay to it's original configuration.  

It has been through other hands since it left Canada in December 2005.  So
just for the record - I didn't "block the relay".



Website:  http://www3.telus.net/ve7tk  

Subject:        [TenTec] AL-811 amp integration with Omni V
From:   k8vf_mark@centurytel.net
Date:   Mon, 6 Aug 2007 22:29:58 -0400

Ah HA!

The old "blocked relay" trick....

A suggestion:

When we modify our rigs, guys and gals, how about documenting it some where 
in the manual, like on a fly sheet.
Remember, you wont be around forever.

I am glad you found the problem.


TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>