[Top] [All Lists]

Re: [TenTec] Orion 2 problem

To: tentec@contesting.com
Subject: Re: [TenTec] Orion 2 problem
From: RaySoifer@cs.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 15 Aug 2007 18:30:08 EDT
List-post: <mailto:tentec@contesting.com>
In a message dated 8/15/2007 3:23:32 PM Pacific Daylight Time, 
k5sm.bob@gmail.com writes: 
> My Orion 2 has recently developed a problem.  The push button function on
> the gain controls (Main and Sub) and the Cut and PBT controls and the
> RIT/XIT clear have stopped working.  I did a master reset, but the problem
> persists.  Anyone else had this problem?  Suggestions?

If you haven't already, try a full reset.  Turn off the power.  Hold down the 
VFO B LOCK button while turning the power back on.  Then do a "master reset" 
again, answering YES when asked about clearing user memories.

Good luck,


TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>