Congratulations Joe. You have a nice TT assortment!
How about this? Put a switch in the line that feeds operating voltage to the
digital display. Turn it on when you are tuning the band. Once on the
operating frequency, turn it off. Or, just leave it off most of the time.
the tuning dial skirt as your primary frequency readout, just like the analog
Triton. :-) Turn the digital dial on occasionally to confirm your
The Argosy II did just that. Never had a problem with digital noise but could
turn the display off when not needed, which is most of the time. Cuts power
drain on receive quite a bit too.
On 16 Aug 2007 at 23:56, Joe Roberts wrote:
> After four years with no TT radio, and two years with no radios at all
> due to being in a PhD program with no time or space to operate, I broke
> down and bought an Omni V, a Paragon II, and a 544 (Triton digital).
> Previously, I was a long time user of the Corsair II.
> Best I can do at the moment is a half wave vertical on a kite pole on
> the back patio, but have been playing with each of the radios enough to
> get a good feel for their personalities...and Ten-Tec radios sure do
> have personalities.
> Leaving aside comments on the Omni V (needs mods for SSB use) and
> Paragon II (which is a fabulous, smooth operating rig), I am really in
> love with the Triton 544. What great audio! This is one of the most easy
> listening radios I've heard and I have owned dozens of good tube rigs,
> FT-102s, Collins, Kenwoods, blah blah blah. Line noise that makes the
> Omni V painful to listen to is hardly there on the 544. It's like magic.
> The 544 is almost perfect for what it is, except for the little quirk of
> DISPLAY NOISE. Now, this phenomenon is well known and seems to be
> accepted as part of the "whole package" of the 544. It is always loud
> enough to be perceived even under signals and noise, chugging away like
> a pulsating digital mode signal.
> True...I have never encountered a case where the noise prevented copy of
> a real signal. But it is kind of irksome and a wart on what is otherwise
> an unbelievably good vintage receiver.
> Once upon a time, I would have ripped into this thing with a scope,
> shielded cable, and a pile of fresh caps and ferrites, but since I only
> have a Swiss Army knife and a Fluke DMM at hand, I am reluctant to mess
> with it. Also, I recognize that it is what it is and the noise is part
> of that 70s digital identity in a way.
> Nonetheless, I'm wondering if anyone has a solution for this normal
> "problem" -- short of buying an analog Triton, which I might do anyway.
> The construction and layout of the rig, which is very traditional and a
> nostalgic joy to behold, exhibits no effort to control digital noise.
> In my 35 year hamming career I have seen many Tritons in magazine ads
> and on hamfest tables and never realized what they were. Now I know, and
> I can't think of a better radio to drag out to the back patio with a
> hand mic for some early evening relaxation.
> I'm inclined to leave the 544 as is and enjoy it...but if anybody has
> hints and kinks on getting rid of that infernal display trash, I'd love
> to hear it.
> Joe N5KAT
> TenTec mailing list
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.484 / Virus Database: 269.11.19/955 - Release Date: 8/15/2007
> 4:55 PM
TenTec mailing list