Thanks very much for the information.
Ron Castro wrote:
> I think you are describing R340, the meter calibration pot. You'll find it
> in the schematics for the original Orion in the A7 group, 81917_10.pdf.
> Ron Castro
> Chief Technical Officer
> Results Radio, LLC
> ----- Original Message -----
> From: "Dave Heil" <email@example.com>
> To: "Discussion of Ten-Tec Equipment" <firstname.lastname@example.org>
> Sent: Friday, August 17, 2007 10:17 PM
> Subject: [TenTec] Orion - What's this trim pot?
>> I'm finally getting around to doing the sweep mod on my Orion. I
>> removed the covers this evening. I know about the master transmit audio
>> gain pot and the contrast post under the lip of the front panel.
>> Can someone tell me the function of the pot which is behind the top edge
>> of the front panel and visible after removing the top cover? There is
>> an access hole for it on the black, ventilated metal strip just behind
>> the panel.
>> Dave Heil K8MN
>> TenTec mailing list
> TenTec mailing list
TenTec mailing list