Sure! I did (and still do) that exact thing. I started with a ME machine and
used several USB to serial adaptors. Set-up different COM port numbers
for each radio and could even run several at one time. I ran a Pegasus and
RX-320 sumultaneously for quite some time for instance.
On 21 Aug 2007 at 18:46, Mike Bryce wrote:
> I have at last got a computer in the shack.. yea, I know... way to long
> but that being said, there's only one serial port on this used
> machine. (sister gave it to me. It's running windows ME..)
> Now, is it possible to get a serial port to usb device for each and
> every rig I have now, then plug the usb cables into a usb hub and
> select the one that I want?
> I would like to run the argonaut 5, the jupiter, and the RX320 all
> from the same computer and not have to keep swapping out the single
> serial port cable I have.
> Can this be done or am I in deep do...
> Mike, WB8VGE
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.1/963 - Release Date: 8/20/2007 5:44
TenTec mailing list