[Top] [All Lists]

Re: [TenTec] controlling more than one ten tec radio with onecomputer

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] controlling more than one ten tec radio with onecomputer
From: wa3fiy@radioadv.com
Reply-to: wa3fiy@radioadv.com,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 21 Aug 2007 19:26:59 -0400
List-post: <mailto:tentec@contesting.com>
Sure!   I did (and still do) that exact thing.  I started with a ME machine and 
used several USB to serial adaptors.  Set-up different COM port numbers 
for each radio and could even run several at one time.  I ran a Pegasus and 
RX-320 sumultaneously for quite some time for instance.

Very interesting!



On 21 Aug 2007 at 18:46, Mike Bryce wrote:

> boys...
> I have at last got a computer in the shack.. yea, I know... way to long
> but that being said, there's only one serial port on this used  
> machine. (sister gave it to me. It's running windows ME..)
> Now, is it possible to get a serial port to usb device for each and  
> every rig I have now, then plug the usb cables into a usb hub and  
> select the one that I want?
> I would like to run the argonaut 5, the jupiter, and the RX320 all  
> from the same computer and not have to keep swapping out the single  
> serial port cable I have.
> Can this be done or am I in deep do...
> mike
> Mike, WB8VGE

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.484 / Virus Database: 269.12.1/963 - Release Date: 8/20/2007 5:44 

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>