[Top] [All Lists]

Re: [TenTec] Omni-V memories

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Omni-V memories
From: "Mike Brown" <k9mi@sbcglobal.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 1 Sep 2007 03:36:34 -0000
List-post: <mailto:tentec@contesting.com>
Ralph, Carl, N4PY makes a new chip for the Omni V called V.92 which does not 
require any mods to the radio (outside of changing one chip).  I really 
don't use memories that much for hf use, but you can hit the "ENTER" key, 
then punch in any frequency you want to go to. Split operation is easier, 
you now have rig control if you build a cable like Carl describes in the 
V.92 txt file. I can use it with N1MM, WriteLog and Log-EQF. Any windows 
logging program I have. Easily money well spent and gives the Omni V all the 
features I need.

73, Mike K9MI

----- Original Message ----- 
From: "Ralph Matheny" <mathenyr@marietta.edu>
To: <tentec@contesting.com>
Sent: Saturday, September 01, 2007 01:04
Subject: [TenTec] Omni-V memories

> Is there any way to improve the operation of the memory "system" used in
> the Omni-V ??  I was thinking there were some after-market firmware chips
> which allowed band stacking, etc.
> Used the old Omni-V last weekend mobile/rover in the Ohio QSO party.  It
> was very happy to be back in action after sitting for a couple years.  The
> radio is a classic design.  Just got awful tired of cranking from one
> end of the vfo range to the other.
> Ralph Matheny
> 207 Gibbons Place
> Marietta Ohio  45750
> mathenyr@marietta.edu
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>