The Elecraft XG-1 or XG-2 mini modules are inexpensive and perfect for
alignment and checking sensitivity.
XG-1 is 40 meters only and the XG-2 is 80, 40, and 20 meters. The output is
selectable between 50 microvolts and 1 microvolt. The output level is
stable and very accurate. (and no computer required!)
73, Bill - K6WLM
----- Original Message -----
From: "Harry G. McGavran Jr. " <w5pny@w5pny.com>
To: <tentec@contesting.com>
Sent: Tuesday, October 16, 2007 9:01 AM
Subject: [TenTec] Centering Orion II Roofing Filters
>
> It seems that one really needs a stable steady
> signal, both in frequency and level to do this job.
>
> Short of homebrewing a crystal calibrator (since
> these seem to be few are far between these days,
> even on ebay), what do people use for a good steady
> signal source for this job. Off the air signals
> seem to have enough QSB to be a problem and without
> a second rig to use for a source, I was curious
> what other people used...
>
> 73,
>
> Harry, W5PNY
>
>
>
>
> --
>
> Harry G. McGavran, Jr.
>
> E-mail: w5pny@arrl.net
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|