Thanks for the post, Paul. If you have any pics of that Omni VII mod,
please send them along to me. And Ron......NO need for any defense on your
part. A perfectly reasonable expectation.
73 John K4NP
----- Original Message -----
From: "Paul Christensen" <w9ac@arrl.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Sunday, December 09, 2007 9:18 AM
Subject: Re: [TenTec] OMNI VII QSK users with good ears....
>> I'm trying to think of a modern Ten-Tec radio that doesn't use a relay
>> for
>> T/R switching, and can't think of one!
>
> Their reed relays are plenty fast enough and I see no real benefit over
> PIN
> diode switching except for longevity. Still, few relays fail in these
> rigs
> even after 20+ years.
>
> I did replace the T/R relay in my Omni VII with a Matsushita/Aromat RS-12D
> reed relay, made specifically for RF switching. While the stock Omni VII
> relay is reasonably quiet, it's possible to take the slight ticking noise
> to
> zero with the RS-12D.
>
> Ten Tec used an ingenious scheme to isolate the T/R relay. They mounted
> it
> on a very small PCB and cushioned it with foam. I took their idea a step
> further and replaced the solid conductor wire with ultra-fine strand,
> silicone jacketed wire from a robotics company.
>
> http://www.trossenrobotics.com/store/p/5224-22AWG-High-Strand-Count-Silicone-Wire-Combo-Pack-25-ft-.aspx
>
> The new wire is super flexible and does not acoustically transmit the
> armature noise back to the PCB. Totally silent QSK now even when placing
> the ear on the cabinet.
>
> Paul, W9AC
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.16.15/1174 - Release Date:
> 12/6/2007 10:11 AM
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|