Guess I'll let the external LPF do the work and not add an internal LPF
on the receive side. Should be very easy mod, but I'll leave the radio
as original as possible.
----- Original Message -----
From: "Paul Christensen" <firstname.lastname@example.org>
To: "'Jack Mandelman'" <email@example.com>; "'Discussion of Ten-Tec
Sent: Wednesday, December 12, 2007 6:51 PM
Subject: RE: [TenTec] Omni VI+ receiver UHF intermod
>"I was able to eliminate the intermod by inserting an old Johnson
front of the Omni VI+. Has anyone encountered or heard of a similar UHF
intermod problem with the Omni VI?
I ran into the exact issue back in '92 when I purchased my Omni Six. I
a Nye Viking low-pass TVI filter to eliminate everything received above
I traced my source of interference to a couple local TV and FM broadcast
transmitters. Not sure why the front end was susceptible to
VHF, but an internal LPF right at the front of the Rx would have been a
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.17.1/1181 - Release Date:
12/11/2007 5:05 PM
TenTec mailing list