[Top] [All Lists]

[TenTec] Omni VII with digital mode, VA2AM, Rejean

To: tentec@contesting.com
Subject: [TenTec] Omni VII with digital mode, VA2AM, Rejean
From: Réjean Léveillé <va2am@videotron.ca>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 24 Dec 2007 21:46:24 -0500
List-post: <mailto:tentec@contesting.com>
Seen that I am new with Ten-Tec radio I will split my questions.
I got going Omni VII for RTTY with FSK in transmit without any problem. My 
concern is on the receiving side, I already have a Rigblaster plus for the 
digital mode and to run RTTY or PSK31, the signal out from the accessory-1 
seems to loud. I must keep my sound card line-in all the way down to almost 
zero otherwise I get flagged overflow (WinPSKse232) and MTTY high noise floor. 
I use to connect my sound card with other rig with 600 mv output and the 
line-in setting was almost half scale.
Is there an adjustment I could do or TT output is settled at 1 volt from the 
Thank you, 73 Rejean
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Omni VII with digital mode, VA2AM, Rejean, Réjean Léveillé <=