[Top] [All Lists]

Re: [TenTec] OMNI6 PLUS Alignment procedure needed

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] OMNI6 PLUS Alignment procedure needed
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 29 Dec 2007 19:51:23 -0600
List-post: <mailto:tentec@contesting.com>
Complete alignment of the Omni VI Plus can be done by following the Tentec 
provided manual.  Each board has it's alignment procedure if and as 
required.  For a fully operational radio, it takes about 3 hrs for a 
complete job, start to finish, all bands, all modes.

Of course one must have the necessary test equipment to do the job.  Failing 
that, one can diddle 'til their hearts content and likely won't have a 
properly aligned radio after 3 days.

Bob, K4TAX

> Has anyone tried to do a complete alignment on their rig using  the owners
> manual and not a service manual.
> Yes, I am sure you could look at the information provided and try to come
> close but you will certainly know that with the service manual  you could 
> have
> done it better and faster.

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>