Re: [TenTec] Need help from an Orion owner......

["Duane Calvin" <ac5aa1@gmail.com>]

I can do the same with only the ground side of the antenna connected at the
238B antenna tuner.  The Orion has a lot of gain, and often I can copy
signals with nothing connected to the antenna port at all.

        73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of John
Sent: Monday, January 07, 2008 4:52 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Need help from an Orion owner......

Hi folks.....

Can someone please see if they have ANY coupling when between ANT1 and ANT2
positions on the FRONT panel?

I find that with only one antenna, connected only to the rear panel ANT1 SO
239, I can read signals in either the ANT1 or ANT2 front panel positions.
Obviously, the signal is MUCH stronger when front panel is set for ANT1.
But, I can still fully copy the signal when using front panel position ANT2.

What do you find, please?

Thanks much for any help.........

73 John K4NP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec