Yes, a mic rewired for 8-pin will work fine with your Omni VII. As for the
4-pin to 8-pin adapters and 8-pim to 4-pin adapters that you see on the auction
site, they would be useful if you had two transcievers, each of which had a
different connector and you wanted to use the same mic with both, then you
could mount the adapter on the transciever with the connector that was
different than the mic connector
-------------- Original message --------------
From: "Denton" <email@example.com>
> I am using a 705 with my omni 7....wired it to the 8 pin plug that came with
> the 7.
> ----- Original Message -----
> From: "Steve Berg"
> To: "Discussion of Ten-Tec Equipment"
> Sent: Wednesday, July 02, 2008 12:43 PM
> Subject: Re: [TenTec] Omni VII Mic
> > There is someone on e-bay who is selling 4 to 8 pin adapters. I do not
> > know if these would help. I have been soldering 4 pin plugs onto D104
> > and Shure 444 mics for years so I can use them with my Ten Tecs.
> > 73,
> > Steve WA9JML
> > DW Holtman wrote:
> >> Hello,
> >> I'm looking for a mic for a newely aquired Omni VII. Will a 705 or a 708
> >> work If I rewire the plug and put on an 8 pin plug?
> >> Any other suggestions on a good mic? Ten Tec will not have any for sale
> >> until the end of July.
> >> Thank you in advance for any help.
> >> Best,
> >> DW Holtman
> >> WB7SSN
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> >> No virus found in this incoming message.
> >> Checked by AVG - http://www.avg.com
> >> Version: 8.0.135 / Virus Database: 270.4.4/1530 - Release Date: 7/2/2008
> >> 8:05 AM
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> TenTec mailing list
TenTec mailing list