The bypass switch on the transverter was designed for 100 watts. I believe
you are ok at 200 watts doing this but I would watch the SWR at the rig. If
it suddenly jumps then it was not ok.
Carl Moreschi N4PY
121 Little Bell Drive
Hays, NC 28635
----- Original Message -----
From: "AD5VJ Bob" <email@example.com>
Sent: Monday, July 14, 2008 6:17 PM
Subject: [TenTec] TenTec 1208
>I just acquired a TenTec 1208 to use with my FT-1000MP MKV and I have a
>couple of questions.
> I know that I have to detune the rig to 5-7 watts to use the 1208
> My main question is:
> If I hook up to the 'HF' antenna port and switch over to 'bypass' can I
> still use my 200W output into the bypass of the inverter, or
> do I need to put a coax switch inline and completely bypass the inverter?
> My next question is does anyone have a 6 meter vertical they would part
> 73 fer nw es gud DX,
> QSL VIA: LotW, BUR, e-QSL
> Bob AD5VJ
> Old Calls WB5ZQU, WY5L/KH3, KE5CTY, N5IET
> Luke 14:28-30
> 28"Suppose one of you wants to build a tower. Will he not first sit down
> and estimate the cost to see if he has enough money to
> complete it? 29For if he lays the foundation and is not able to finish it,
> everyone who sees it will ridicule him, 30saying, 'This
> fellow began to build and was not able to finish.'
> TenTec mailing list
TenTec mailing list