[Top] [All Lists]

[TenTec] Fw: Replacing the speaker in a Delta II/Argonaut II

To: <tentec@contesting.com>
Subject: [TenTec] Fw: Replacing the speaker in a Delta II/Argonaut II
From: "Bill Acito W1PA" <w1pa@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 7 Oct 2008 13:06:40 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
>And your cat may be leaving for other territories because when that
>series RC isn't there the amplifier will oscillate at ultrasonic
>frequencies. Its a parasitic suppressor.

Thanks guys...  I'll take a look and perform the "cat" test tonight (I have 
two). I'll look at the
schematic and see if, in fact, the series RC is switched out or replicated 
with the
external speaker jack (remember, no issue on an external speaker, and the 
module stays cool with the external speaker)

I am hoping that is it. The more I stare at the Delta with the skins off, 
the more
I realize that taking the frame apart to get to the speaker will not be a 
trivial task.

Bill W1PA

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>