TenTec
[Top] [All Lists]

Re: [TenTec] Corsair II & Titan connections

To: <geraldj@storm.weather.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Corsair II & Titan connections
From: "CSM\(r\) Gary Huber" <glhuber@msn.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 10 Dec 2008 16:47:39 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Thanks Jerry, I apologize for repeating the mistake. 

I was reminded that I'd previously uploaded the PDF to the TenTecWiki and that 
it can be see on the 560 & 561 pages of the TenTecWiki.  You download it from 
http://www.tentecwiki.org/doku.php?id=560  or   
http://www.tentecwiki.org/doku.php?id=561 


Best regards,

CSM(r) Gary Huber - AB9M
9679 Heron Bay Rd
Bloomington, IL 61705
(309-662-0604)
www.csm-gh.com 
glhuber@msn.com 
gary.huber@us.army.mil 

--------------------------------------------------
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Sent: Wednesday, December 10, 2008 2:34 PM
To: <tentec@contesting.com>
Subject: Re: [TenTec] Corsair II & Titan connections

> On Wed, 2008-12-10 at 06:45 -0600, CSM(r) Gary Huber wrote:
>> Tim (and all others with this problem), I have the Ten-Tec provided mod 
>> to provide the keying loop QSK capability on the back panel of Corsair
>>  IIs. I sent it to the group last night as a PDF attachment but it is
>>  being held for the moderator due to its size.  While it shows less 
>> than 500k on my drive, its reported as over 6M by the group's attachment 
>> regulator.  If the email and attachment is not released shortly, 
>> contact me directly with the subject "Corsair-QSK" and I will send you 
>> the mod direct.
>> 
>> Best regards,
>> 
>> CSM(r) Gary Huber - AB9M
>> 9679 Heron Bay Rd
>> Bloomington, IL 61705
>> (309-662-0604)
>> www.csm-gh.com 
>> glhuber@msn.com 
>> gary.huber@us.army.mil 
>> 
> E-mail attachments are sent using only the printable character set so
> are recoded in base 64 which makes them take up many more bytes than the
> binary file. Its most effective to post such a file on a publiclly
> accessible server and then put the link to that file and server in your
> e-mail. That way I won't take 45 minutes to download that e-mail at
> 28.8K when I don't need it bad. I think most mail list servers these
> days limit attachments to only a few K as a measure of combatting
> s*p*a*m. When I detect a large attachment, I can sometimes go to my
> isp's web mail page and down load that way, but one of my isp's times
> out at about 3.5 MB download and there's nothing that can be done about
> it except to go find a faster connection in town and download to my
> thumb drive. 
> 
> Attachment size limits are there to keep from swamping the mail list
> server's available bandwidth and to keep out graphics based s*p*a*m.
> 
> 73, Jerry, K0CQ
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>