TenTec
[Top] [All Lists]

[TenTec] Omni 6 "lights"

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] Omni 6 "lights"
From: Jim Goudie <af3z@arrl.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 27 Jan 2009 14:42:43 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hello,

My Omni 6 has gone "dark" on me at times:  a few times when I first 
turned it on; once after it was already on.  By "dark" I mean that 
the light for the meter went off and the frequency display LED's were 
off as well.  The rig continued to function normally... I completed a 
qso "in the dark" the one time.  Turning the rig off and then back on 
has solved the problem each time.

I assume that it may be a relay acting up.  So, before I dig in to 
fix the problem, I was wondering if that assumption sounds 
reasonable.   My second assumption is that the fix would be to 
replace the relay.  I'm guessing that it is sealed, unable to be cleaned.

Am I on the right track?  Any advice?

tnx & 73,  Jim   AF3Z

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>