The following note is part of the documentation on the AF and RF AGC
facilities.
73, Merle - W0EWM
----------------------------------------------------------------------------------------------------------------
"To support this feature, it was necessary to modify the DSP code and boot
system to allow the radio to
contain 2 full versions of the DSP code. This was required because the DST's
are fully loaded, firmware
wise, and did not have room to store both AGC algorithms.
To select between Audio and RF AGC, a menu items has been added to OTHER MENU.
The choices are
AF AGC and RF AGC. This selection can be changed at any time but will not take
affect until the radio's
power has been cycled."
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|