[Top] [All Lists]

Re: [TenTec] RF Ground

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] RF Ground
From: "Gary Smith" <Gary@doctorgary.net>
Reply-to: Gary@doctorgary.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 06 Apr 2009 06:05:22 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hi Bob,

My antennae use the same radial field of 60 or so 130' radials. The 
radial plate is 360' from the house. The only connection between the 
house and the radial field is via the coax shield. Are you suggesting 
I run a length of additional wire from one of the radials to the 
grounding point of the service entrance ground rod?

Gary, KA1J

> As to having a RF ground,  a ground radial system below your antenna is the 
> reference point for that antenna.  Several antennas can share the same 
> radial system.  Also that radial system must be bonded back to the service 
> entrance ground.
> 73
> Bob, K4TAX

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>