The simple answer is probably YES !
Walt K8CV Royal Oak, MI.
----- Original Message -----
From: "Gary Smith" <Gary@doctorgary.net>
To: "Discussion of Ten-Tec Equipment" <email@example.com>
Sent: Monday, April 06, 2009 6:05 AM
Subject: Re: [TenTec] RF Ground
> Hi Bob,
> My antennae use the same radial field of 60 or so 130' radials. The
> radial plate is 360' from the house. The only connection between the
> house and the radial field is via the coax shield. Are you suggesting
> I run a length of additional wire from one of the radials to the
> grounding point of the service entrance ground rod?
> Gary, KA1J
>> As to having a RF ground, a ground radial system below your antenna is
>> reference point for that antenna. Several antennas can share the same
>> radial system. Also that radial system must be bonded back to the
>> entrance ground.
>> Bob, K4TAX
> TenTec mailing list
TenTec mailing list