Make sure you have MMTTY set up correctly in the Misc setup and that you
have the correct soundcard selected in the soundcard setup menu. I think
the Tx Port in the Misc setup has to be on Sound??
I can't verify this for sure as I use FSK (which I highly suggest with the
O2 as this sets the filters and passband automatically for RTTY) and have
the COM-TxD (FSK) box checked.
----- Original Message -----
Sent: Thursday, April 09, 2009 7:20 PM
Subject: [TenTec] Orion RTTY & Soundcard
>I am setting up my Orion for Digital direct from Laptop soundcard. Using
>TT Aux Cable, and MMTTY, have white and yellow audio cables installed.
>Print RTTY FB on Laptop. Can't XMT. in XMT mode, ORION does not enter XMT
>mode. Settingss in MENU are: VOX VOX TRIP = 75%; Anti-VOX = 50% (have
>tried down to 5%); VOX Hang =0.25sec/ SSB - AUX INPUT GAIN = 72 (have gone
>dn to 25); TX AUDIO SOURCE = BOTH; h/w Mic Gain = 0.5db / AUDIO left/right
> Any suggestions???
> TenTec mailing list
TenTec mailing list