I agree with the No-Lox, Steel wool, etc. One thing I do AFTER EVERYTHING is
cleaned and the way I want to put it back together. I pick up some of the
thin latex gloves, wash everything down with Vinegar (Color doesn't matter)
let dry thoroughly and then apply the No-Lox kinda like using PVC Glue,
can't use too much but apply to both parts twist to insure everything is
100% covered and then bolt and/or pop rivet together (After you double check
your measurements one more time)
Lots of luck,
----- Original Message -----
From: "Dr. Gerald N. Johnson" <email@example.com>
Sent: Wednesday, April 29, 2009 7:03 PM
Subject: Re: [TenTec] OT: cleaners, etc
> On Wed, 2009-04-29 at 18:46 -0500, firstname.lastname@example.org wrote:
>> getting used beam, suggestions for cleaning and reassembling,
>> also protecting junctions.....
>> deoxit to clean ends andthen???
>> Dave K8BBM
> AlnoOx aluminum wire connection grease at the connections and junctions.
> Gerald J.
> TenTec mailing list
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.557 / Virus Database: 270.12.8/2086 - Release Date: 4/29/2009
> 6:37 AM
TenTec mailing list