[Top] [All Lists]

Re: [TenTec] Head-Phone volume in Orion2

To: <geraldj@weather.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Head-Phone volume in Orion2
From: "Richards" <jruing@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 2 Sep 2009 11:36:27 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Good point, Jerry.   I think it applies to microphone selection
and use, as well.   

That is the reason I often recommend a good, but not always 
the best microphones for ham use.   Consider how the Shure
communications mics are of limited range by design and they
have a real good following. 

Just MY take,... anyway. 

==============  Richards - K8JHR  =================

----- Original Message ----- 

. Having a narrower pass band in the audio and
> headphones would not have given out those annoying none signal
> components. There is no need for audio stage or reproducer responses in
> ham gear down to 30 Hz or above 3 or 4 KHz yet with wide range head
> phones that wide response is present.

> 73, Jerry, K0CQ

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>