[Top] [All Lists]

Re: [TenTec] 262G Schematic

To: tentec@contesting.com
Subject: Re: [TenTec] 262G Schematic
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 06 Sep 2009 02:52:12 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Wed, 2009-09-02 at 18:14 +0000, Mahaini, Saad A wrote:
> Hello, I'm looking for the schematic if possible or at least the pinout
> of the power connector .  73 Saad N5FF
The standard connections like on a Corsair II are:

Pin 1 (bottom of rig) is ground.
Pins 2 and 3 are the switch on the radio volume control. Won't handle
more than a couple amps. Its intended to switch the power supply 120
volt line input.
Pin 4 +12 to 14 volts. 

The book says Pin 1 has a rib on the plastic part of the cable connector
and pin 4 has a rib on the chassis connector.

73, Jerry, K0CQ

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>