I would say that the core should not be greased. If assembled correctly,
it should not rub on the inside of the coil form.
Andrew Moore wrote:
> Finally rebuilding the Triton 540 PTO here.
> Step says to grease the threads inside the pistol. Done. But are you
> supposed to also grease the outside surface of the 1/2-inch or so diameter
> core (medium gray color, with ribs) which moves in/out of the PTO coil? I
> don't recall degreasing the inside of the PTO core when I took all this
> apart (been a couple months) so I'm guessing no but wanted to check with the
> TenTec mailing list
TenTec mailing list