TenTec
[Top] [All Lists]

Re: [TenTec] 2nd rx with Orion II

To: "Natan" <w6xr@frontiernet.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] 2nd rx with Orion II
From: "N4PY2" <n4py2@earthlink.net>
Reply-to: N4PY2 <n4py2@earthlink.net>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 2 Nov 2009 21:21:59 -0500
List-post: <mailto:tentec@contesting.com>
Are you talking about how to get the 75A4 to share the same antenna as the Orion? If so, I have a very simple mod I can send you to bring the sub-receiver antenna connection out to the spare jack on the back of the Orion II.

Carl Moreschi N4PY
121 Little Bell Drive
Hays, NC 28635
www.n4py.com


----- Original Message ----- From: "Natan" <w6xr@frontiernet.net>
To: <tentec@contesting.com>
Sent: Monday, November 02, 2009 9:15 PM
Subject: [TenTec] 2nd rx with Orion II


Dear Friends,


I feel I'm about to ask a question probably  having a simple, well
distributed answer, but the solution is evading me.  My Orion II is my
primary radio, however, on 160 and 80 there are times my well worked over
Collins 75A4 receiver performs quite well.  Is there a way I can use the
built in Orion II switching arrangements to feed not only the Orion II but
at the same time give equal signal to the 2nd rx. which would be the 75A4.
Writelog might be able to handle the detected audio switching but I can't
figure out how to excite the 75A4 at the same time as the Orion II.  The
detected audio makes it way to a pair of Heil "silent" headsets. Ideally, I
would like the audio from the Orion II in one ear and the audio from the
75A4 in the other.

Any ideas would be appreciated.

Thanks and 73,

Natan W6XR
Freeville, NY


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>