TenTec
[Top] [All Lists]

Re: [TenTec] Corsair II Vfo Molex Jumper

To: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Corsair II Vfo Molex Jumper
From: Bwana Bob <wb2vuf@verizon.net>
Reply-to: wb2vuf@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 24 Mar 2010 21:31:25 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Thanks, Jerry.

                        73,

                        Bob WB2VUF

Dr. Gerald N. Johnson wrote:
> The shells and the pins are purchased separately and yes Mouser shows 
> gold plated pins. You do need a tool to remove the pins from the shell 
> though, which costs several bucks and a new shell is on the order of 78 
> cents.
> 
> Gerald J.
> 
> On 3/24/2010 7:44 PM, Bwana Bob wrote:
>> I didn't know that they were available with gold pins. That would help
>> because the pins in mine seem to develop oxidation which causes the PTO
>> to shift frequency.
>>
>>                              73,
>>
>>                              Bob WB2VUF
>>
>> Dr. Gerald N. Johnson wrote:
>>> Shipping compared to the cost of the parts will shock you! Go with the
>>> gold pins to help that shock a little.
>>>
>>> 73, Jerry, K0CQ
>>>
>>> On 3/21/2010 1:02 PM, gsanderlin wrote:
>>>> Thanks Jerry!
>>>>
>>>> Will order tomorrow..  I had requested that info from Tentec.  The guy 
>>>> spoke with in tech support said they didn't have any and did'nt have part 
>>>> numbers
>>>>
>>>> -----Original Message-----
>>>> From: Dr. Gerald N. Johnson<geraldj@weather.net>
>>>> Sent: Sunday, March 21, 2010 13:56
>>>> To: tentec@contesting.com
>>>> Subject: Re: [TenTec] Corsair II Vfo Molex Jumper
>>>>
>>>> Molex 03-06-2092 or 03-06-2091 with male pins 02-06-2103 or 02-06-6103.
>>>> 9 pin plugs with .062" male pins. Prefix these numbers with 538- for
>>>> Mouser catalog numbers.
>>>>
>>>> 73, Jerry, K0CQ
>>>>
>>>> On 3/21/2010 11:49 AM, gsanderlin wrote:
>>>>> Does anyone have A Molex Jumper for the Corsair II to allow it to work, 
>>>>> without the VFO connected, or know of the molex part number for the 
>>>>> housing and the pins.
>>>>> _______________________________________________
>>>>> TenTec mailing list
>>>>> TenTec@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>