TenTec
[Top] [All Lists]

Re: [TenTec] New Orion 2 Firmware - Version 2.042A

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] New Orion 2 Firmware - Version 2.042A
From: Fotis SV8ING <sv8ing@yahoo.gr>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 14 Apr 2010 19:19:35 +0000 (GMT)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hi 
I installed today the new FW,but I am unhappy too.

The NR is too agressive ,even at 1 setting.Yes,it copies some stations,but 
loses many as it affects the audio of the station you trying to copy...
I use the line in for my TX audio,and I had to raise about 20-25db to get 
enough power output.(Why did they change that???)
Didn't test the front mic gain yet,but as I read many people have noticed the 
same behaviour.
I also see that the RF gain works different now as it affects a lot more the 
S-meter.
(When I finished the update,I had my S-meter hanging about S-8 without antenna 
connected.When I raised the RF gain from 70 to 100,the S-meter dropped down as 
usual.)
I don't know if this is good or bad yet...

These are 2-3 quick notes about the new FW.
Testing continues....

73

Fotis SV8ING

GREECE

--- Στις Τρίτ., 13/04/10, ο/η Rsoifer@aol.com <Rsoifer@aol.com> έγραψε:

Από: Rsoifer@aol.com <Rsoifer@aol.com>
Θέμα: Re: [TenTec] New Orion 2 Firmware - Version 2.042A
Προς: tentec@contesting.com
Ημερομηνία: Τρίτη, 13 Απρίλιος 2010, 23:55

I too had the hanging S meter problem.  A master reset solved  it.
 
73 Ray W2RS
 
 
In a message dated 4/13/2010 10:40:13 P.M. GMT Standard Time,  
peter@frenning.dk writes:

Peter  Frenning [OZ1PIF] skrev:
> Well I'm trying to flash mine (have done it  several times before), but 
> it hangs at line 1044...
> I'll wait  a bit longer, and then try to restart it.
>   
After a  computer reboot, it worked to completion, must have been a local 
gremlin -  I am admittedly making life a bit difficult for myself, I'm 
running WinXP  in a Virtual machine (VirtualBox) on Ubuntu Linux (I don't 
own a natively  running Windows machine) and using an USB->Serial adapter 
to connect to  the Orion!

My S-meter was staying at around S8 after the update, but a  Master Reset 
fixed that (kept user memories and optional filter  settings).

Further reports will come after I gain a little experience  with the update.

-- 
Vy 73 de OZ1PIF/5Q2M,  Peter

*****************************************
** Genius is one per  cent inspiration, **
** and ninety-nine per cent         **
** perspiration.             **
**         -- Thomas A. Edison    **
*****************************************
email: peter(no-spam  filler)@frenning.dk
http://www.frenning.dk/oz1pif.htm
Ph. +45 4619  3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby  Sj.
Denmark
*****************************************


_______________________________________________
TenTec  mailing  list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>