Might that be a little high for a project Omni D with no accessories?
David Goncalves
On Thu, May 20, 2010 at 10:05 AM, Louis Ciotti <lciotti1@gmail.com> wrote:
> OK So I have decided since I do not have time to tinker with this
> radio I am going to sell it off so someone can get some use out of the
> radio. It works for the most part. The 7MHz band is intermittent, as
> well as the upper portion on 10m (29MHz+). I picked this up as a
> project radio. I have traced the 7MHz problem to the crystal
> connector, but the 10M problem I have not found. If I lightly press
> on the crystal for the 7MHz band it will work. I suspect the
> connection is dirty and a good cleaning will make it come alive.
> Power output is 100% as far as I can tell, and made a DX contact to
> France on 15M with it shortly after I picked that radio up. $250
> shipped to the lower 48.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
--
David Goncalves
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|