[Top] [All Lists]

Re: [TenTec] FS: EV 727SR Microphone

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] FS: EV 727SR Microphone
From: "Ron Notarius W3WN" <wn3vaw@verizon.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 13 Jul 2010 21:31:56 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
And it didn't take long, I already have someone for the mike and someone
else as "first alternate" if there is a change of mind.

Thanks all.


-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Ron Notarius W3WN
Sent: Tuesday, July 13, 2010 8:50 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: [TenTec] FS: EV 727SR Microphone

For Sale:  Electro-Voice 727SR ceramic microphone
$20 including shipping.

But wait!  There's more...

You may or may not recall that right before Dayton, I mentioned that I had
recently bought this "wired for Ten-Tec" EV 727SR mike... only to find out
when it arrived that it wasn't wired for a 4 pin connector (Corsair, Omni,
etc.) but was wired with a 1/4" stereo phono plug for some of the older
rigs.  (No one's fault but my own for not verifying that first).

Yes, I did pick up the parts to modify the mike.  However, thanks to the
generosity of my friend Greg NB3C (nee KQ3DX), who recently sold his Omni
VI, I now have a 705 Electret Microphone to use with my Omni VI+.  And this
makes the EV surplus.  

The mike cost me $19 + shipping, but I'll pass it on to a better owner for
an even $20 and pay for the shipping myself (domestic only please).  

Not only that, but I'll throw in (at no additional charge) a KDK DM-55A (if
I can read the small print correctly) mike that I picked up at Dayton.  My
original plan was to build a small "converter box" that I was going to plug
the EV into, and use the cable from this KDK to attach back to the Omni (and
add in connection for a footswitch and so forth).  The rest of the parts I
have a use for, but the KDK mike, I don't.  So, since it was intended for
use in the EV project, I'll pass it on with the mike.  (I have no idea of
the working condition of the KDK mike; I was told it worked "just fine" but
bought it as-is, and that's how I'm passing it on.

Oh, before I forget, the EV mike is still in the bag as received from the
dealer.  Never had a reason to open it...so I'm passing it on that way.

Anyone interested in the mikes, please email me direct at wn3vaw@verizon.net

Now, that leaves me with only one major problem.  

You see, the Omni VI+ is a black-dot Ten-Tec, but the 705 mike is an
orange-red dot TT.  I just hope that, considering all the discussions on
these matters in recent years here on the reflector, that the two ARE

73, ron w3wn

TenTec mailing list

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>