There were minor circuit differences between my 544 and Omni-C blankers.
The Omni-C blanker did not work nearly as well. I set the schematics
side-by-side and made the Omni-C correspond. Seems it was more like minor
rewiring but it has been a looooong time ago (and I've slept since then). I
do recall that it was an easy project -- probably not taking more than an
hour of a lazy man's time. I can dig out the manuals and send schematics
and images of the physical board layout (components, but not the traces).
If I had the gumption, I could pull the boards and scan the traces, I
I would guess that Ten-Tec would give their blessing to your effort.
----- Original Message -----
From: "mike bryce" <firstname.lastname@example.org>
To: "Discussion of Ten-Tec Equipment" <email@example.com>
Sent: Sunday, July 25, 2010 7:03 PM
Subject: Re: [TenTec] Looking for NB for Triton 544
> I'm always looking for a winter project.
> Provided there are no hard to get parts such as inductors or transformers,
> I haven't seen a schematic, I could pop a circuit board for one.
> Provided, I don't step on too many toes considering it is copyrighted
> material from ten tec.
> Again, not looking at the schematic, does the noise blanker for the
> Triton four also work for the Omni series?
> Mike, WB8VGE
> SunLight Energy Systems
> The Heathkit Shop
> J e e p
> "If you can't explain it simply then you don't understand it well enough"
> Albert Einstein
> On Jul 25, 2010, at 6:39 PM, Louis Ciotti wrote:
>> With out looking at the schematic, I believe the noise blanker circuit
>> could easily be replicated if you do not locate one.
>> On Sun, Jul 25, 2010 at 2:59 AM, Joe Roberts <firstname.lastname@example.org> wrote:
>>> Thought I'd ask on the off-chance somebody has a noise blanker board
>>> available for the 544...
>>> Love the old 544 but drowning in summertime electrical noise here...much
>>> of it blankable on many radios. Wish the Omni V blanker worked. Usually
>>> end up running an FT-102 lately because of the effective NB.
>>> Maybe I'll get lucky and find one!!
>>> Joe N5KAT
TenTec mailing list