TenTec
[Top] [All Lists]

Re: [TenTec] Titan 425 Meter lamps?

To: tentec@contesting.com
Subject: Re: [TenTec] Titan 425 Meter lamps?
From: John Oglesby <john91@charter.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 02 Oct 2010 20:46:34 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
After opening the amp, the lamps are 1820s in parallel.

John

On 10/2/2010 6:59 PM, Dr. Gerald N. Johnson wrote:
> The lamps could be in parallel. The schematic is badly drawn. Two on
> line vendors of lamps
> http://www.donsbulbs.com/cgi-bin/r/b.pl/1820|28v|0.1a~usa.html
> and
> http://bulbster.com/lightbulbs/eiko-1820bts-49790-p-2306.html
> claim the lamps are 1820 but two 1820 in parallel at 28 volts will draw 200
> milliamps and fry that 20 ohm 1/2 watt resistor with 0.8 watt dissipation.
>
> 73, Jerry, K0CQ
>
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>